Possible Fuel Tank Vent Obstruction May Cause Fuel Spray

    June 19th, 2018

    Re: Possible Fuel Tank Vent Obstruction May Cause Fuel Spray


    Dear Can-Am® Owner,

    BRP is conducting a safety recall on some of its 2018 Can-Am ATV models.

    Our records show that you own a potentially affected vehicle.


    What is the potential problem?

    The fuel tank may build excessive pressure due to a blocked vent. This could cause fuel to spray on occupants or bystanders when opening the fuel cap, potentially causing injury. Additionally, if an ignition source was present, this could create a risk of fire, causing injury and/or damage to property.

    Possible Loss of Steering - Dynamic Power Steering (DPS) Shaft May Break

    December 19, 2017

     

    Re: Possible Loss of Steering - Dynamic Power Steering (DPS) Shaft May Break

    Dear Can-Am® Owner,

     

    BRP is conducting a safety recall on certain ATV models.

    Our records show that you own a potentially affected vehicle.

     

    What is the potential problem?

    The DPS shaft may break causing a loss of steering control. In some circumstances, this situation may cause injuries or death.

     

    Which models are involved?

    Model year 2017 Can-Am Outlander™ / Outlander™ MAX™ equipped with a DPS and 450 or 570 engines.

    Re: On certain 2016 Can-Am Defender™ Side-by-Side vehicles - Misleading park position displayed in instrument cluster

    December 20th, 2016

    Re: On certain 2016 Can-Am DefenderTM Side-by-Side vehicles - Misleading park position displayed in instrument cluster

    Dear Can-Am® Owner,

    BRP is conducting a safety recall on certain side-by-side models.

    Our records show that you own a potentially affected vehicle.

    What is the potential problem?

    On certain 2016 Can-Am DefenderTM Side-by-Side vehicles, the instrument cluster may display the gearbox position “P” even though the gearbox is not mechanically engaged in the park position. In some circumstances, this misleading display may result in the vehicle unexpectedly rolling away, which could lead to injury or even death.

    Possible Steering Lock - Rack and Pinion Assembly

    November 17, 2016

    Re: Possible Steering Lock - Rack and Pinion Assembly

    Dear Can-Am® Owner,

    BRP is conducting a safety recall on certain side-by-side models.

    Our records show that you own a potentially affected vehicle.

    What is the potential problem?
    On certain 2017 Can-Am Maverick® X3 vehicles, the steering rack and pinion assembly may have been manufactured by our supplier with an improper amount of grease. In some circumstances, this situation may result in steering lock which could lead to injury or even death.

    Which models are involved?
    Certain serial numbers of model year 2017 Can-Am Maverick X3.

    What will BRP do?
    BRP intends to repair involved vehicles free of charge for the customer (parts and labor).

    What should you do?

    Contact your authorized BRP Can-Am side-by-side dealer and schedule an appointment to have your vehicle repaired.

    The solution consists of replacing the rack and pinion assembly. This repair should take approximately 2 hours to complete. The dealer will perform this work at no charge to you.

    What should you do until your vehicle is repaired?

    BRP recommends that you avoid driving your vehicle until the repair is performed.

    Note that the presence of aftermarket modifications will not prevent you from receiving the repair at no cost. The presence of these modifications during the repair will not affect any existing warranty or service contract.

    What to do if you feel this notice is an error?

    This notice was mailed to you according to the most current information we have available. If you no longer own this vehicle or some information in this notice is incorrect, please contact BRP at your earliest convenience.

    If you have questions or need assistance, or to find the nearest authorized BRP Can-am side-by-side dealer:

    • Visit : http://uk.brp.com/off-road/

    • Or call: +44 20 88 65 04 89

    Your continued satisfaction with your BRP product is important to us. We have taken this action in the interest of your safety and your vehicle's proper operation.

    We sincerely apologize for any inconvenience this matter may cause.

     

    Sincerely,

    BRP After-Sales Service Department

     

     

    Re: Possible Loss of Steering - Steering Coupling Stripping on Rack and Pinion Assembly

    June 29th, 2016


    Dear Can-Am® Owner,


    BRP is conducting a safety recall on certain side-by-side models. This notice follows the interim notice issued in April 2016.

    Our records show that you own a potentially affected vehicle.


    What is the potential problem?

    Steering coupling splines may strip on rack and pinion assembly. In some circumstances, this situation may result in a loss of steering control and possibly cause injuries or even death.